- 36”x12”x1” pine shelf board => $8.94
- 4x Screws Eyes 1 5/8” => $3.92
- Two 36” bungie cords => $2.48
All totaled, this desk plus my existing treadmill puts the cost of this treadmill desk at $524.34. Not too bad.
Step 1: Drill them holes
I used a 3/16” drill bit, and bore 4 holes, two on each end, of the shelf board.
Step 2: Screw them eyes
I then took my screw eyes, and screwed them in, one to each hole I just drilled.
Step 3: Strap it in
I layed the board over the treadmill’s arms, then attached the bungie cords to the opposite site.